Commissioning Checklist

Confirm approved design, variations and cause/effect information are available. Confirm equipment matches the specification and panel/device compatibility requirements. Inspect panel, PSUs, batteries, interfaces and field devices for correct installation. Verify loop/zone/device addressing against drawings and schedules. Check cable terminations, polarity where applicable, screens and segregation. Test manual call points and automatic detectors using appropriate test methods. Test sounders, VADs, voice alarm interfaces and staged/alarm zones as applicable. Prove cause/effect outputs, door releases, plant shutdowns, smoke control and monitored interfaces. Prove fault monitoring: open circuit, short circuit/isolators, mains fail and battery/charger fault as applicable. Confirm alarm transmission/ARC signalling arrangements where present. Verify labels, zone plans, operating instructions, logbook and record drawings. Record test results, variations, outstanding works and certification/handover documents. Reset checklist